|
|
BT02 - 6/12V Battery Test - 40-2000 CCA
+ 12/24V Charging System Test
|
 |
Contact BC Battery Controller to purchase this product >>
|
|
FEATURES
- The professional tester suitable for all 6/12V batteries (wet, gel, MF, AGM, VRLA) from 40 to 2000 CCA (SAE), as well as for 12/24V cranking/charging electrical systems
- Easy to use, it provides accurate and reliable results
- Fast testing procedure, in few seconds the LCD display shows the test results as well as a clear recommended action:
A. Good & Pass (battery in good conditions)
B. Good & Recharge
C. Recharge & Retest
D. Bad & Replace
E. Bad Cell & Replace
- The device is also suitable to analyse deeply discharged batteries (Voltmeter range: 1.5V to 30V)
- Possibility to select all the main industry international standards for batteries (SAE, DIN, EN, IEC or JIS)
- Patented single load, dynamic resistance technology, in order to minimize the battery drain during the execution of the test
- Protective rubber shell, high shock resistance
- Practical ABS case for storing and transporting the unit
|
| TECHNICAL DATA |
BT02 |
| Voltage |
6/12 Volt |
| Standards |
SAE, EN, JIS, CA, DIN, IEC |
| Battery Types |
6/12 V Lead Acid
(Wet, Gel, MF, VRLA, AGM, Ca/Ca...) |
| Voltmeter Range |
1.5 - 30 Volt |
| Battery Capacity Range |
40 - 2000 CCA (SAE)
40 - 2100 CCA (EN)
30 - 1500 CCA (IEC)
25 - 1300 CCA (DIN) |
| Languages |
English, Italian, French, German,
Spanish, Portuguese, Japanese |
| Operating Temperature |
0°C - 50°C |
| Tolerance |
CCA ± 5%, Voltage ± 0.05% |
| Batteries included |
6 x 1.5V - LR6 - AA |
| Size & Weight |
190x90x115 mm, 420 gr |
| Cable Length |
1.75 m |
| Protections |
Anti-shock shell
high resistance to impacts | | | | |
|
|
All the Battery Chargers and Accessories BC Battery Controller are developed and manufactured by Forelettronica srl. BC Battery Controller is a Registered Trademark.