Motorbike & Motorcycle Battery Charger Scooter & moped Battery Charger Vintage Motorcycle 6 Volt Battery Charger Snowmobile Battery Charger Watercraft Battery Charger ATV & Four Wheeler Battery Charger Car Battery Charger Vintage Car Battery Charger Caravan and RV Battery Charger Gardening and Lawnmower Battery Charger Motor Boat Battery Charger Sailing Boat Battery Charger

12V CIGARETTE LIGHTER SOCKET FOR MOTORCYCLE

P12A - 12V Cigarette Lighter Socket

WATERPROOF 12V CIGARETTE
LIGHTER SOCKET WITH
HANDLEBAR HOLDER

IDEAL TO RECHARGE ELECTRONIC DEVICES EQUIPPED WITH A CIGAR SOCKET ADAPTER (Max 2 Amp - 12V)
Recharge through cigarette lighter socket
FEATURES
  • 12V cigar socket
  • The accessory is made up of a wiring harness with eyelets - designed for a permanent connection to the motorcycle battery (picture 2 - length 80 cm) - and a cabled cigarette lighter socket with a waterproof connection system (picture 1). Total lenght: 125 cm (ideal for any motorcycle)
  • Totally safe & secure: protection fuse with waterproof fuseholder (picture 3)
  • It can be used to recharge and/or to supply electronic devices provided with a cigar socket adapter (mobile phones, GPS, MP3 readers...) or as power input for the connection of battery charger BC Battery Controller, to charge and maintain the battery on the vehicle
  • Waterproof: protection cap and sealed connection system
  • Equipped with a handlebar holder. Two nylon cable ties included, to securely fix the cable to the frame of the bike
  • Possibility of panel mounting (mounting ring nut included)
  • Compatible with USB adapters for cigarette lighter socket (max. 4.2 Amp - 5 Volt)
The cigarette lighter socket P12A features waterproof connections


The cigarette lighter socket P12A includes a cable with eyelets which can remain always connected to the battery


The cigarette lighter socket P12A has a fuse protection
12V cigarette lighter socket with protective cap, handlebar holder, sealed boot, ring nut for panel mounting
The cigarette lighter socket is sold in blister pack

Versatility:
The cigarette lighter socket can be used not only for charging or supplying electronic devices provided with a cigar socket adapter, like mobile phones, gps navigators or heated handgrips, but also for the connection of BC battery chargers through the accessory ACC612V.

Quality:
The cable is realized with high quality materials specific for the use in the Automotive industry (resistance to oils, greases, atmospheric agents and thermic/mechanical stress guaranteed). The connector suitable to be employed in tough conditions is a guarantee of quality and endurance of the battery connecting system.

Installation of the socket:
The socket can be mounted on the handlebar through the included holder. Two nylon cable ties are included to securely fix the cable to the frame of the bike.
Alternatively, it is possible to remove the handlebar holder and to place the socket in a compartment of the bike or to mount it to a panel: the installation is easy and with no possibility of mistake (polarity inversion, etc.). You have to unscrew the fixing nut and insert the socket in a hole with a diameter of 28 mm (1.1 inches). Finally, fix the socket with the nut.


Fixing to the battery:
The eyelets are dimensioned so that they adapt to the standards of every battery on the market (installed on motorbikes, motorcycles and light vehicles). In the same way, however, the eyelets can be used for the permanent installation on medium/high capacity batteries (more than 40 Ah), inserting the eyelet in the screw of the clamps reaching the battery.

Safety:
A fuse is installed on the wiring. The wiring and connections are watertight.
In addition, it should be noted that - if you use the socket to connect a BC battery charger - the charger is protected against permanent short-circuit of the battery poles (in other words, the contact between the eyelets for an indefinite time won't damage the battery charger).

BC BATTERY CHARGERS
FOR HOME BATTERY CARE
BC DUETTO - TWO CHARGING PROGRAMS
FOR LEAD-ACID BATTERIES (WET, GEL,
MF, AGM...) AND LITHIUM BATTERIES
Lead-Acid/Lithium Battery Charger BC DUETTO
BC BATTERY CHARGERS
FOR LEAD-ACID BATTERIES
(WET, GEL, MF, AGM, VRLA...)
BC K900 6/12V BC BRAVO 1500
+ 12V CAN-Bus CHARGE & TEST
BC K900 6/12V battery charger and maintainer BC BRAVO battery charger and tester
BC SMART 1500 BC JUNIOR 1500
BC SMART battery charger and maintainer BC JUNIOR battery charger and maintainer
BC EASY 6 BC EASY 4
BC EASY 6 battery charger and maintainer BC EASY 4 battery charger and maintainer
PROFESSIONAL BATTERY CARE
BC Pro 4S BT02
BC Pro 4S - Professional battery charger with 4 units BT02 battery and alternator tester
PRIVATE USERS
Select the right battery charger
- for your motorcycle >>
- for your car >>
- for your battery >>
 
Where to buy >>
Information Request >>
F.A.Q. - Frequently Asked Questions >>
PROFESSIONAL USERS
Join BC Distribution Network >>
Find BC Distributors in your Country >>
BC Pro Series - Professional
Battery Chargers & Testers
- BC Pro 4S - Professional Charger for Lead-Acid and Lithium Batteries >>
- BT02 6/12V Battery Test 40-2000 CCA
  + 12/24V Charging System Test >>

- Accessories >>
FAIRS AND EXIBITIONS
EICMA 2017 - November 07-12 - Milan - Hall 13 Stand S-64
Automechanika Birmingham 2017 - June 6-8 - NEC Birmingham - Stand 20G98
AUTOPROMOTEC 2017 - May 24-28 - Bologna - Hall 36 Stand E7
TICINO MOTOR EXPO 2017 - April 08-09 - Lugano - TTS
EXPOMECANICA 2017 - April 07-09 - Porto - Leatronic - Hall 6
Motopassion 2017 - March 24-April 2 - Belgrade - Motomania d.o.o.
MOTO DAYS 2017 - March 09-12 - Rome
IRISH MOTORBIKE & SCOOTER SHOW 2017 - March 03-05 - Dublin
MP17 MOTORCYCLE SHOW - February 03-05 - 2017 - Helsinki
MOTORCYCLE TRADE EXPO 2017 - January 15-17 - Coventry
EICMA 2016 - November 08-13 - Milan
INTERMOT 2016 - October 05-09 - Cologne
Automechanika 2016 - September 13-17 - Frankfurt
PRESS
Company Profile
Home  |  Company  |  Contact Us  |  Site Map